SINOYQX Melamine Foam for Electrical Equipment: Material Evaluation

SINOYQX Melamine Foam for Electrical Equipment: Material Properties and Qualification

[Chengdu, July 2024]
SINOYQX, a specialized manufacturer of high-performance foam materials, announces the launch of an ultra-high resistivity melamine insulation foam developed for the power, new energy, and rail transit industries. The material can be evaluated for selected acoustic, thermal and cushioning functions alongside EVA and PU foams. Electrical insulation for high-voltage equipment requires separately qualified dielectric components; a high surface-resistivity value does not establish an equipment voltage rating.

🎯 Key Product Advantages

✅ Surface Resistivity and Electrical Qualification
A surface resistivity reported at approximately 10¹⁸ Ω is a material property that must be matched to the relevant test method and grade. It does not establish high-voltage insulation capability or justify an untested performance ranking against EVA foam.

✅ Integrated Flame Retardancy, Thermal, and Acoustic Performance
UL94 flame behaviour, thermal conductivity, acoustics and continuous service temperatures must be confirmed using the applicable grade-specific reports. A material-level UL94 result does not qualify a complete high-voltage electrical assembly.

✅ Substance and Environmental Documentation
Substance content and RoHS/REACH status must be checked against current documentation for the selected material grade and application.

📊 Product Performance Comparison

PropertySINOYQX Melamine Insulation FoamTraditional EVA FoamModified PU Foam
Surface Resistivity≥10¹⁸ ΩVaries by EVA grade, conditioning and test methodVaries by PU grade, conditioning and test method
Flame RetardancyUL94 result should be confirmed for the relevant foam grade and sample thicknessB-grade or non-ratedB-grade
Temperature ResistanceVerify grade-specific continuous and short-term temperature limits–30 ~ +80℃–30 ~ +80℃
Dimensional StabilityAssembly ageing and dimensional stability require testingVaries by EVA formulation and applicationVaries by PU formulation and application
Environmental ComplianceCheck grade-specific RoHS and REACH documentationSome grades contain halogen/VOCsSome grades contain halogen/VOCs
Density8–12 kg/m³25–35 kg/m³20–35 kg/m³
Thermal & Acoustic InsulationExcellent (≤0.032 W/m·K)ModerateModerate
Recommended ApplicationsSelected acoustic and thermal uses after system qualificationGeneral cushioning & fillingGeneral cushioning & filling

🏭 Typical Applications

The following are possible engineering evaluation settings, not confirmed high-voltage dielectric use cases:

🔹 Nonstructural acoustic or thermal treatment inside suitable electrical cabinets, isolated from live components
🔹 Composite cushioning research; no primary cable dielectric or sealing qualification is claimed
🔹 Thermal or acoustic materials evaluated separately from electrical insulation supports
🔹 Thermal and acoustic lining for rail transit electrical compartments
🔹 Replacement of EVA foam in industrial equipment

📈 Industry Trends: Moving Beyond Traditional Foams

With rising demands for high-voltage electrical insulation foam, power and energy companies are transitioning from conventional EVA and PU foams to higher-performance, sustainable alternatives.

A SINOYQX spokesperson commented:

Grade-specific tests and complete assembly qualification are essential before making any safety, service-life or cost advantage claim.

📝 About SINOYQX

SINOYQX is dedicated to the development and production of advanced foam solutions used in high-voltage electrical equipment, rail transit, aerospace, and energy storage applications. The company focuses on delivering innovative materials that integrate flame retardancy, thermal insulation, and electrical isolation.

📞 Contact Us for Samples and Technical Support

✅ Email: [email protected]
✅ Phone/WeChat: +86-13540702776
✅ Website: www.sinoyqx.com

SINOYQX melamine foam — available for material-level evaluation in thermal and acoustic equipment assemblies; electrical qualification must be completed separately.