SINOYQX YQX-U-6 Ultra-Lightweight Melamine Foam: Product Introduction and Qualification Guide

SINOYQX YQX-U-6 Ultra-Lightweight Melamine Foam

Product overview and application qualification

YQX-U-6 is a low-density, open-cell melamine foam offered for acoustic, thermal and lightweight component evaluation. Its nominal density is 6 ± 2 kg/m³. Material selection should be based on the exact grade, thickness, operating environment and results of relevant testing. A nominal low density alone does not establish superiority over other manufacturers’ products or suitability for regulated transport applications.

Key Material Characteristics

CharacteristicProduct information and qualification
MaterialOpen-cell melamine foam
Nominal density6 ± 2 kg/m³; confirm measured density for the supplied batch
Acoustic performanceEvaluate absorption or insertion loss using standard tests at specified thickness and frequency range
Thermal performanceConfirm grade-specific thermal conductivity under relevant test conditions
Compression and handlingObtain grade-specific stress, recovery and durability data for the intended assembly
Fire and smokeReview applicable flame, smoke and toxicity reports for the exact product and installed configuration

Engineering Applications to Evaluate

  • Automotive and transport acoustics: lightweight sound-absorbing parts, subject to the applicable transport fire requirements and environmental ageing tests.
  • HVAC and industrial equipment: acoustic liners and thermal components where airflow, moisture and installation safety are properly designed.
  • Electrical equipment enclosures: nonstructural acoustic or thermal treatment only; not a substitute for rated electrical insulation or fire barriers.
  • Aircraft or aerospace development: research samples can be evaluated against a specified qualification plan, but no aircraft or spacecraft qualification is claimed by this article.

How to Compare YQX-U-6 with Other Melamine Foams

For meaningful competitor comparisons, use samples of equivalent density, thickness, conditioning and geometry. Compare independently measured acoustic performance, thermal conductivity, fire behaviour, compression properties and total installed cost. No claim of outperforming BASF Basotect® UL is made without matched test evidence.

Fire Standards and Aerospace Applications

UL94, FAR/CS 25.853, ASTM E662, BSS 7239 and rail transit fire standards address different test conditions and qualification needs. They are not interchangeable, and inclusion in a test plan does not mean a product is certified. SINOYQX can review the documentation available for a given foam grade; aerospace or rail use requires project-specific acceptance.

Request Material Data and Samples

Contact SINOYQX with the required density, thickness, dimensions, operating temperature, intended application and applicable standards. Confirm current TDS, SDS and test documentation before making purchasing or engineering decisions.

Frequently Asked Questions

Is YQX-U-6 certified to FAR 25.853?

No such certification is established here. A specific test report and application-specific review are needed before making that claim.

Is YQX-U-6 stronger or lighter than BASF UL?

The nominal density is 6 ± 2 kg/m³. Material superiority requires matched, verifiable comparative data and should not be inferred from nominal density alone.

What data are needed for qualification?

Confirm the product grade and physical properties, then obtain the appropriate acoustic, thermal, compression and fire test results for the intended use.